8 simple tips to change the direction your beard grows

Last Updated on December 31, 2021 by Sam

You know that time of year when everyone is growing beards for the holidays? You should take some precautions to ensure your beard grows in an aesthetically pleasing manner.

The “how to train your beard to grow straight” is a blog post that gives 8 simple tips to change the direction your beard grows.

If you have cowlicks or other unpleasant growth patterns, you may wish to adjust the direction of your beard.

Transplantation of folicless are the only way to permanently change the direction your beard develops. Heat, wax-based treatments, and chemical straightening may all be used to temporarily modify the direction of your beard.

The direction in which your beard grows is determined by the direction in which the hair follicles point. Any unfavorable beard growth directions are etched into your DNA from the moment you are born. Genetics largely determines the angle at which your hair follicles sit relative to the surface of your skin, which may result in various hair morphologies.

Your beard will be straighter than usual if your beard hair is precisely perpendicular to your skin. Hair follicles that develop at an acute angle relative to the skin’s surface are more likely to be very curly.

In the early stages of developing a beard, you’ll observe the way your hair follicles sit. Early on, determining the direction of your beard development might assist you in determining which beard styles are ideal for you.

When hair growth isn’t going in the right direction, shorter beards suffer more than longer beards. Beard hair takes a long time to develop and become long enough to bend, flex, and hold a posture.


Short beards are challenging to shape since they are stiff and straight.

This article will examine permanent, semi-permanent, and temporary methods for getting your beard to sit in the direction you choose.

Long-term solutions

Other than removing the hair follicle, relocating it, and adjusting the angle, there are no permanent remedies. This procedure is dangerous, since the transplanted follicles may not adapt to their new home, leaving you with bald patches and scars.

Follicle transplant

The cosmetic surgeon may remove and modify the direction of hair growth using a technique known as follicular unit grafting. There’s no assurance that the hair will grow back in its original location.

Surgery should be your last resort since it has the potential to go wrong and inflict more harm than the problem for which you went in. This does not imply that individuals do not desire it, and according to a 2013 research, facial hair may be transplanted via a process known as follicular unit transplantation. The research looked at transplantation of brows, goatees, moustaches, and beards. The following are the study’s main findings:

  • The surgeon must ensure that the recipient sites are positioned at the shallowest angle feasible to the face in order to get the greatest outcomes.
  • In the beard, there is a risk zone where pumps may occur on occasion. It’s in the center vertical column that runs from the lower lip to the chin. Hairs transplanted in this region might sometimes cause bumps.


You should have no concerns beyond what is common for cosmetic surgery if you consult with a trained and certified cosmetic surgeon who has performed this treatment many times previously.


Using chemical straightening procedures, you may alter the way your beard hair grows semi-permanently. A beard relaxing lotion is used to achieve chemical straightening.

For shorter beards, a semi-permanent method like chemical straightening is ideal since heat tools are ineffective and the hairs are tougher and not long enough to bend and flex into shape.

Using a beard relaxer and chemical straightener is surprisingly easy, and you can do it yourself. You may use a beard relaxer if you know how to wash and maintain your beard.

Your hair will remain straight for a long period, and new hair growth will be curlier than the treated section. Repeat the application of the chemical straightener until the new growth has reached roughly 25 to 50 percent of the length of your present beard.

Straightening using chemicals

The fundamental stages for using a chemical straightening lotion are as follows:

  • soak your hair in the shower as you normally would while washing it
  • Apply the relaxing shampoo from the roots to the tips of your hair, and if necessary, separate your beard into smaller areas.
  • Use a fine-tooth comb to properly spread the calming ingredient throughout your beard.
  • Allow 30 minutes for the beard relaxing shampoo to soak in before continuing with your usual bathing procedure.
  • Rinse your beard with water after 30 minutes to eliminate the most of the relaxing shampoo.
  • Blow dry your beard on a medium heat setting after you’ve finished showering.
  • Straighten whatever curls you have using a straightening iron.
  • Apply the neutraliser to prevent the relaxing lotion from functioning and to keep your beard hair straight.
  • Wash your beard three times using the shampoo that comes with the beard straightening cream.
  • Towel dry your beard and use the sealer to seal in the hair and keep it straight.
  • Finish drying your beard as you usually would, such as using a hairdryer, and then proceed to the next step.

You won’t need to use heat treatments or other hold products as much after using a chemical straightener. You may concentrate on moisturizing and nourishing your beard instead of utilizing possibly harmful high heat to drive it into a certain direction throughout the day if you use heat tools less.

Solutions that are just temporary

When your beard is around 2 to 3 inches long, you may manipulate the way the longer hair lays on your face to mask the direction the beard hair grows in.

Follicle direction is less important in the Beard style of those with a very lengthy beard.

These temporary remedies work especially effectively on beards that are longer. Temporary treatments should also be applied on a regular basis to keep the beard’s style and form.

Grow it for a longer time.

I detected some less-than-desirable growth direction in my beard while growing it. I was motivated to solve the problem, and by growing out my hair, I was able to simply conceal the concerns with growth direction.

Every beard problem may be fixed by growing a longer beard, according to one of the jokes on my YouTube channel.

Your beard becomes thicker and more flexible as it grows.

The weight of the hair may ultimately cause it to pull downward. If that fails, the lengthy beard hairs are much simpler to bend and style. When beard hair is short, the cross-sectional area is often quite large and uneven, leading it to be highly stiff.

Growing it out allows you to bend it and make goods that keep their form much better, as well as cover faults in the growth direction.

Treatments with heat

To straighten and retain a beard in place, use a beard straightener or a hairdryer on high heat. As soon as my beard became longer than 1 inch, I discovered that heat treatment was an easy way to keep it in place.

When you apply extreme heat to your beard, it breaks the links between the proteins in your hair and resets them in the direction they cool.

Heat is merely a temporary remedy, and the bonding will revert to its normal state as soon as the hair is wet.

Rather of using a specific beard brush or heated beard equipment, I prefer to utilize a high-heat blow dryer. Experiment with various approaches until you find one that works for you. Heat may be applied to your beard using a heated comb or flat irons (such as those used to straighten hair).

When using intense heat near your skin, be cautious not to burn yourself.

Check out my YouTube video below for all of the considerations you should make while straightening your beard, including all of the hazards and advice.



The degree of grip that a product provides to your beard determines how effective it is. They’re the building blocks of a beautiful beard. Knowing which products to use for certain situations is crucial to turning a decent beard into a fantastic beard.

You may apply less product after your beard is longer than a couple of inches. For shorter beard styles or especially difficult regions of your beard, using a solution with a high wax component is essential.

Beard balm and wax

Beard wax and balm are the greatest ways to shape your beard and keep it in place throughout the day. To keep my beard growth in a certain direction, I produce my DIY beard balm with a high wax content. Because my beard is wavy and curly, I have to use my own recipe. Commercial beard balms don’t keep my beard as well as my homemade version.

The YouTube video below demonstrates how I create my own beard balm using Shea butter and coconut oil.


If you don’t want to manufacture your own beard wax, Honest Amish sells it for a fair price. Look for a beard balm and wax that is produced entirely of natural components and has a significant amount of wax. The more wax there is, the simpler it will be to keep your hair in place.

Wrapping your beard

Wrapping your moustache or beard first thing in the morning, straight out of the shower, will help correct any beard growth direction concerns you may have introduced while sleeping.

Using a handkerchief as a tissue

While walking my dog around the neighborhood, I often run into folks. I’ve made friends with an Indian guy who has a magnificent beard.

He has a big moustache that is constantly brushed to one side to keep it out of his lips.

When I asked him what his secret was, he told me this.

To keep his moustache flat and brushed to the sides, he wraps a piece of cloth (such as a handkerchief) over it. Even if he has a thick moustache, he may teach it to not fall into his mouth during the day with this easy intervention.

This was shocking news to me since I generally utilize heat and product.

He said he does it every morning for at least 15 minutes to keep his moustache under control. This method appeals to me since it is free and open to everyone with a beard or moustache.

I suggest trying this first if you want to drive your beard into a specific direction while reducing the quantity of substance you use. All you’ll need is a scrap of fabric.


If you don’t want to wrap your beard and want a more aggressive look, you might try pinning it to keep it in place.

Hairpins may be used to style your beard while it dries after a shower.

To pin your hair in the direction you want it to set throughout the day, use non-crease clips from Amazon.

After around 30 minutes, you should be able to remove the pins. Some individuals choose to pin their beards all day, which gives a strong physical grip and may help teach the beard to grow in a certain direction.


You can braid your beard hairs so that they sit in the direction you want them to develop, and you can also construct a beard ponytail by pulling the hair forward and forming a front-facing ponytail with your beard if you have a really long beard.


It took almost a year for my beard to grow long enough to draw fully front and tie in a ponytail.

Braids or a beard ponytail may be worn in two different ways:

  1. You might use a braid to keep the beard in place while your hair is drying in the morning — and then unwind the braid before heading out into the world.
  2. During the day, keep a tiny or big braid in your hair to keep the beard in place. To perform a decent job of holding the two sides of the fork together, it doesn’t have to be especially huge (or apparent).

If your hair needs a little more control, any of these solutions is worth a go!

The last word

We’ve gone through the permanent, semi-permanent, and temporary methods to modify the direction your beard develops in this post.

Genetics determines the direction in which your hair follicles develop and is predetermined at birth. Once your hair is long enough to sit in either direction, you may alter its orientation. To get the beard to sit in the right direction, you may employ a semi-permanent treatment, such as a chemical straightener, or you can utilize temporary remedies.

My advise is to try a variety of various ways to see which mix of actions works best for your beard. If you have a really wiry beard, you may need to use three or more of the aforementioned methods to keep your hair under control and growing in the appropriate direction.

Watch This Video-

The “does shaving change hair growth direction” is a question that has been asked many times. The answer is no, it doesn’t. Shaving will not change the direction of your beard.

Frequently Asked Questions

Can I change the direction my beard grows?

A: You should not change your beards direction unless it is causing a medical problem or you want to change things up. The best option would be to visit an expert barber and get them to trim the hair, if needed!

How do I change the direction of my beard?

It may be hard to believe, but there is no way to change the direction of your beard. Its meant as a static feature – it will always grow in that direction you have chosen.

How can I train my beard to lay down?

A: There are a few ways you can train your beard to lay down nicely. The first is by scrubbing it with a towel while wet, which will help loosen the hairs and make them easier to comb downwards. You should also use an exfoliating soap like Dove or Olay before this process, as they have small granules that increase exfoliation. These steps will take some time but might be worth it if you want your beard to lay flat on its own over time!

Related Tags

  • how to make your beard grow down instead of out
  • changing beard growth direction
  • can you change beard growth direction
  • how to train beard hair to lay down
  • how to train your beard to grow down