How To Make A Beard Shaping Tool At Home: A Complete Guide

What better time than now to start growing a beard. This guide will teach you everything from how to grow and shape your facial hair, what products are available for men of all beards, different types of tools that can help with the process and more!

The “beard shaping template printable” is a tool that can be used to make your own beard shaping tools. The tool is easy to use and can help you create a perfect shape for your beard.

People who don’t have facial hair can’t comprehend the level of precision required to shape it. To appear good, even the bushiest, craziest beard has to be trimmed carefully. A beard shaping tool may help you save time and effort. There are many excellent beard shaping tools available, but did you know that you can manufacture your own at home?

You can make an excellent beard shaping tool at home with common household objects and a little elbow grease. Furthermore, the tool you develop will be specifically tailored to your face! There are plenty excellent resources available to assist you.

A detailed tutorial on how to construct a beard shaping tool at home can be found below. Let’s start with what constitutes a good beard shaper.

What Are Beard Shaping Tools and How Do They Work?

Have you ever held a trimmer in your hand and looked in the mirror with trepidation? You move your head from side to side, searching for the optimum spot to cut. You might lose your mustache or wind up with an unattractive neckline if you make a mistake.

Fortunately, we live in a great era for beardsmen, and there are plenty of fantastic equipment available to help you shape your beard’s perimeter.

Beard shaping tools are essentially drawing guidelines for your face. Plastic, metal, or wood may all be used to make these tools. They usually include at least one comb implanted in them, which you may use to smooth up your beard before trimming it. 

One or two angles may be incorporated in a beard shaping tool, with a curved cheek line on one side and a more boxed or linear alternative on the other. Many include an arched portion that you may utilize to draw attention to your wicked neckline.

Other portions of certain instruments may be used to square off the sides of your mustache or sideburns.

What Should You Look for When Choosing a Beard Shaper?

There are a lot of highly rated beard shaping products out there, and it’s not always easy to tell how beneficial a product will be just by looking at it. Boomerangs and fidget spinners are two examples of beard shapers. If you don’t know what you want to do with your facial hair before you start, you can wind up with a tool that isn’t right for the job.

Here are some factors to consider while using a beard styling tool:

Size and Shape

As simple as it may seem, you should consider how you want your beard to appear. Then you can figure out which product would help you become in the greatest shape. As previously said, matching a tool to your face isn’t always easy. Finding videos of a possible shaper in action is a smart idea.

 

Furthermore, never consider the size of the beard shaper you’re contemplating. Because there is no such thing as a normal man’s face, it’s critical that you receive a shaping tool that is tailored to your unique features.

Material

The majority of beard shaping tools are made of plastic. The good news is that it lowers manufacturing costs, making the product more inexpensive. The bad news is that thin plastic beard shapers are prone to breaking and wearing out sooner than you’d want.

If you’re going to use a plastic beard shaping tool, we recommend choosing one that is clear. The biggest benefit of a plastic product is that it allows you to observe how your beard is developing in real time.

Wood and metal options are available if you wish to upgrade your shaping tool. Keep in mind that this instrument will most likely be kept in your bathroom. Avoid materials that quickly warp or discolor. Stainless steel is most likely your best bet.

Maneuverability 

A beard shaper may help you get the right curve or line with your clippers, but it only works if you can hold the shaper and trimmer at the same time. Rather of choosing a tool with eight angles, choose a four-angle shaper with a comfortable grip.

Combs 

Beardsmen like a nice comb-through, so look for a beard shaping equipment that includes a comb.

Always comb or brush out your beard before trimming it as a general guideline. This will prevent you from over-shaping your facial hair and ending up with some weird facial hair after grooming. Having a comb built into your shaper makes this procedure a lot easier.

One caveat: each edge of your shaping tool with a comb is one less edge that may be utilized for shaping. We believe that one comb should enough. You’re also sacrificing trimming angles beyond that.

Setting Goals for Making Your Own Beard Shaping Tool

Is It Necessary to Shave Your Chin When You’re Gro… x

A beard shaper is a valuable but relatively primitive tool, as should be obvious at this time. It’s a face stencil, thus it’s necessary. What’s holding you back from building one at home?

The simple answer is that there is none!

However, if you want to construct a beard shaping tool at home, you’ll need to prepare beforehand. “Measure twice, cut once” is a carpentry aphorism. This is especially true when it comes to beard shapers manufactured at home. To cut the angle you’ll need to trim your beard, you’ll need to measure twice.

Making a beard shaper at home entails first determining the optimal angle for your face and then creating a paper template. Then you may create a shaping tool out of a more robust material using that paper pattern. It’s merely a question of smoothing out a polished instrument for regular usage after that.

Let’s get down to business and figure out how to construct your own beard shaping equipment.

Preparation – Obtaining the Required Equipment

Beard Preparation - Securing the Necessary Tools

You’ll need the following components to make the template, regardless of the material you pick for your final beard shaper:

  • A pencil and a sheet of paper
  • A straight edge (ideally a ruler) is required.
  • If you’re constructing a curved cheek perimeter, you’ll need a compass or a protractor.
  • scissors (a pair)

That’s all you’ll need to make your tool’s form. 

The additional tools you’ll need will be determined by the final shaping tool’s substance. A utility knife will suffice if you’re dealing with cardboard. A jigsaw is required when working with wood. Plexiglass necessitates the use of a specialist plastic knife.

The first step is to determine the angle.

To begin, you must choose the angle for your beard tool. This is the most crucial and interesting step since it allows you to customize your shaping tool to your face. This will be done on paper first, and then the template will be transferred to the shaper material.

Unfortunately, we’ll have to go back to high school geometry for this stage of the procedure. We promise not to go into too much detail.

You should start by measuring the distance between the top of your sideburn and the point where your mustache and bear meet. This distance may be measured from the edge of your page to the middle.

This may be the limit of your template if you clip your cheek line straight. Your tool will be a four-sided form with two right angles and a slanting top the length of your cheek.

This is the time to get out the old compass and/or protractor if you want a curved cheek line. You must now draw a circular curve from one side of the line to the other, since you have already drawn out the length of your cheek on the paper. Don’t be concerned if you make a few mistakes. Simply keep experimenting with curves until you find one that works.

After that, all you have to do is cut out the shape you’ve drawn.

Even though you normally have a straight cheek perimeter, we advocate making a curved shaping tool. This is because you may use this tool to mark a clean neckline on each side of your throat by holding it on your neck from beneath the corner of your jaw to an inch or two above your Adam’s Apple!

Step 2: Selecting the Most Appropriate Material

To be honest, the ideal material for your handmade beard shaper can already be in your possession. It might also be a material that you already know how to cut.

Choosing the Best Material

We wouldn’t be surprised if you had an overabundance of cardboard boxes around the home after a year and a half in quarantine. These are ideal for making a fast beard shaping tool at home. You can easily convert your form from paper to cardboard, whether you’re cutting up a shoebox or the back of a legal pad.

Of course, cardboard is inexpensive and simple to use, but it does not hold up well to moisture.

A composite board or thin plywood will work nicely if you have competent woodworking equipment. A sheet of Plexiglass is even better, however most males will need to invest in a special cutting tool. With that considered, a super-sharp plastic knife like the Red Devil 1170 may be had for a surprisingly low price online. 

Cutting the Tool (Step 3)

Let’s start with some significant warnings. You must use caution while cutting cardboard, wood, or plastic. The following three safety precautions should be kept in mind:

  • Always put on protective gear, especially gloves.
  • Wear safety glasses over your eyes if you’re using a power tool.
  • Cut away from your body at all times.

Now, keeping those warnings in mind, you may move your paper shaping tool to a more durable media. The paper template may be taped or pinned in place. You may also put it on your material and outline it. A grease marking pencil may be required for Plexiglass and composite wood.

You may start cutting after you’ve marked out your form. Here are some cutting tips for each kind of material:

Cardboard To match the geometry of your template, use an extraction knife or a box cutter. Simply lay a buffer behind the cardboard to avoid gouging the table below.
Wood To reduce the amount of cuts you’ll need to make, try to align the template with one of your wood’s corners. Make sure your wood is clamped. For straight cuts, a circular saw is ideal. A jigsaw will be required for the curved sides.
Plexiglass Make sure the plastic sheet is securely in place. It may take many swipes with a plastic knife to cut all the way through the plastic.

Finishing Procedures (Step 4)

After you’ve cut your shaping tool, you’ll need to complete it before using it. In general, the goal is to reduce the risk of splinters or injuries from sharp, round edges. 

Wrapping the beard side of the cardboard with duct tape is a fantastic finishing choice. When you put it against your possibly moist face, it will prevent water penetration. Will it be really appealing? Not exactly, but then again, we’re talking about a cardboard beard shaper that was created at home. It won’t be nominated for any design awards.

If you’re dealing with wood or plastic, you’ll need to sand the tool’s edges. This can be done with a power sander or sandpaper and a lot of effort. If you’re working with wood, you’ll also need to sand down any unfinished edges. While you’re at it, add a little of stain for a more opulent look. Just make sure the stain is water-resistant and won’t bother your skin.

Options for Stenciling

That’s how a beard shaping tool is made at home. That’s all well and good, but you’ll note that this tool only has one aspect. What if you want to build something that can be shaped in a variety of ways?

Options for Stenciling

There are lots of spec images for retail shapers online, as luck would have it. Nothing prevents you from printing one of them and using it as a stencil to make a multi-angle tool from scratch. Because you may adjust the picture to fit your face size, you can even end up with a better outcome.

Keep in mind that making a more intricate beard shaper using a stencil will need more expert cutting. Many angles and wedges have been carved out of these goods. Position the template so that the flat edges of the template line up with the edges of your material.

When compared to retail brands,

All of this raises the issue of whether it’s worth the time and effort to construct your own beard shaper at home.

If you utilize things that you already have around the home, you will undoubtedly save money. Beard shaping tools aren’t the most expensive men’s grooming items, but they’re still not free!

The real benefit of building a beard shaper at home, we believe, is that you may customize it to fit your facial hair. Your shaping tool should be the right size and form for your face. You may just measure and cut instead of comparing shopping ad nauseam for the right-sized retail choice.

Of course, some bells and whistles will have to be sacrificed. Even a low-cost plastic replica will be less robust than a handcrafted cardboard tool, there’s no disputing that. It will, however, complete the task. You also won’t be able to incorporate a plastic comb into your shaping tool unless you’re incredibly clever. It’s possible that this will make the alternative combing and shaping operations a little more difficult.

Nonetheless, we feel that building a beard shaping tool at home is a fun and valuable project. If you want to take the retail way for your shaping requirements, here are a few suggestions:

Final Thoughts

Let’s be honest: males are overconfident in their abilities to shave their beards. To avoid regrettable clipper errors, invest on a high-quality beard shaping equipment.

You may buy a variety of beard shapers online, but we suggest trying your hand at making your own at home. It’ll be a pleasant activity, and your beard will appreciate the additional attention and care.

Beard shapers are an excellent technique to prevent ugly cutting errors. Is there, however, a limit at which facial hair is no longer acceptable? Please see our previous piece on when it’s time to let go of your beard for more information.

Ezoicthis advertisement should be reported

A beard shaping tool is a must-have for any man with a beard. In this article, we will show you how to make your own beard shaping tool at home in just 10 minutes. Reference: beardclass beard shaping tool.

Frequently Asked Questions

How do you make a beard shaper?

A: For a beard shaper, all you need is a piece of plastic with two curved sections. You can make it out of any flexible material that will bend and turn easily like paper or wood.

How do you line up a beard with a tool?

A: First, find your beards natural shape and then add some wax to the area where you want it. Make a small dot on one side of the tool with your finger and push down lightly until it is sitting flush against your face. Dont forget to take care when removing excess hair from around clippers or razors so you dont inadvertently cut yourself!

How do you use a beard comb template?

A: Most beard combs will have a template on them which you can use to determine how best to position the comb. Youll usually find one at the top of the comb and another near its tip, with each having multiple lines that indicate where your hair should be.

Related Tags

  • beard shaping template pdf
  • how to use beard shaping tool
  • beard shaping tool kit
  • beard shaping tool walmart
  • best beard shaping tool