One of the most common questions asked in a barber shop is what does damaged beard hair look like. You might be asking yourself, “What causes my beard to appear damaged?” or “How do I fix this problem?”. The answer could take you down an entire rabbit hole of fascinating and fun facts.
The “damaged beard follicles” are a symptom of the “7 symptoms” of what a damaged beard hair looks like. The “7 symptoms” are: 1) patchy, 2) dry, 3) brittle, 4) split ends, 5) uneven, 6) thinning and 7) white hairs.
Simply glancing at the state of the beard might reveal damaged beard hair. You’ve probably seen folks with beards that are dull, dry, frizzy, and thin out in public. Fortunately, there are a number of things you can do to keep your beard from being damaged, and some of the signs are a precursor to far more severe problems.
A beard that has been damaged seems lifeless and uninteresting. It’s likely to have a lot of split ends, which adds to the frizzy look. Because of the dry texture, the beard hair appears wiry and is harsh when touched.
We’ll go over what damaged beard hair looks like, the most prevalent reasons, and everything you can do to get your beard back to its best in this post.
When looking at your beard, you can simply distinguish different degrees of damage. These may be summed up in the following stages:
- cuticle damage – at this point, your beard seems drab and lifeless. There is no change in the length of the beard hair, which is an early symptom of far worse things to come.
- At this stage, hair shaft anomalies such as knotting and hair shaft flaws are widespread. The cuticle has been completely weakened in certain regions, and it may take up to three months of therapy to restore it to its former splendor.
- Full hair breakage – your beard will seem lifeless at this stage of the damage. When touched, the hair will be see-through at the ends and very fragile. Because of the varied lengths of the beard, it has lost its capacity to produce clear lines by trimming.
You may prevent your beard hair from being damaged and breaking off by catching beard damage early and responding quickly.
One of the simplest things to see in a beard is dullness. The hair of a healthy beard has a beautiful sheen to it. The cuticles (outer hair cells) of dull hair do not lie flat, dispersing light when it bounces off the beard’s surface.
Beard hair will never be as lustrous as head hair, but it should feel smooth to the touch — this is one of the easiest ways to tell whether the hair is requesting assistance.
Over-washing your beard, using the incorrect shampoo, having low sebum production on your face, and many other factors may cause your hair to seem dull.
If your beard is starting to seem boring, it’s time to adjust your beard care practice. Changing your habit might be a response to changing seasons or weather conditions.
To combat the dullness that might occur through no fault of your own, always err on the side of caution and include a fair number of moisturizing items in your daily beard regimen.
2. Separated ends
Split ends are quite prevalent in beards that have been damaged. Split ends are caused by the hair shaft fraying and are more prone to appear if your beard hair is very dry. At the ends, the beard hairs will resemble unraveled rope.
Split ends are a consequence of dryness caused by Tools should be heated., poor shampooing, and environmental factors.
Split ends may lead to more damage farther up the shaft of the beard hair, therefore clipping them off is the best method to avoid this. To preserve your beard from additional harm, merely trim a few of centimetres beyond the height of the fraying.
At some time, every bearded person will have to deal with beard split ends. When my beard hair falls out, I often see split ends. I see the end is frayed, signaling that I need to address the problem right now.
In the past, I’ve waited too long to address beard split ends, and the issue has only gotten worse. Acting sooner will prevent a slew of problems in the future.
Frizzy beard hairs are common in damaged beards. It’s not always easy to figure out what’s causing the frizziness. Combating dryness and cutting your beard hair to eliminate broken ends are key to taming a frizzy beard.
A highly wiry and curly beard might also seem frizzy if it hasn’t been trimmed into a distinct shape lately.
If your beard seems thick in the middle but is fluffy and frizzy at the edges and lines, you should address this issue immediately.
Check out my five easy remedies in this post if you want to learn more about controlling a frizzy beard.
The key to resolving frizziness is to address the underlying reasons. The first step in preventing frizziness in your beard is to protect it from external and environmental elements that might cause it.
If you work outdoors, you must use a UV protector to protect your beard from the sun’s rays. One strategy to keep your beard from being damaged from the inside out is to cover it with a beard wrap during especially harmful activities like DIY and tanning.
Damaged beard hair covers a considerably larger surface area than good beard hair. Because damaged beard hairs are harsher and more prone to get entangled, beard hair is wiry. Beard hairs depend on smooth cuticle cells on the exterior to smoothly glide over one another.
Tangled beard hairs are simple to see, and they become apparent while combing and brushing your hair. Your beard’s dryness will determine how wiry it feels, so be sure to deep condition and nurture it throughout its life on your face to keep it from getting dull and knotted.
The wiry nature of your beard is determined by your genetics, and the texture of your beard hair may range from thin and straight to coiled and curly.
- Straight hair – Asians have straighter and fairer beard hair than Caucasians and Africans.
- Wavy hair – Wavy beards with some curliness, but not a tightly coiled beard, are popular among Caucasian men.
- Curly and coiled hair – Those of African heritage often have curlier and coiled hair than people of other ethnicities.
If you detect a substantial change in the wiry character of your beard, you should consider intervening as soon as possible.
Check out my other post by clicking here to learn more about why beard hair is so wiry and what you can do about it.
The hair on a damaged beard is usually quite dry. It’s possible to see the dryness, but it’s preferable to feel it.
When you stroke your beard, does it run smoothly and with little resistance? When you take a little tuft of hair and pass it between the pads of your fingers, does it feel somewhat smooth?
When you touch a dry beard, you can tell it’s there.
I’m always caressing my beard, and I advise you to do the same. You may detect any changes in your beard by lightly rubbing your fingers and fingertips over the top of it.
In the Australian heat, I often notice that my beard is extremely dry. I need to make sure that part of my time is spent moisturising and deep conditioning my beard so that it can recover from the harsh and dry climate of South Australia.
Due to the wind and low humidity, dryness may also develop in frigid areas.
Another feature of a damaged beard that is simple to see is its density. A thin beard is easy to see through, and in my YouTube video below, I go through all of the reasons why your beard seems to be so thin.
When your beard hair gets damaged, it has a significant influence on hair density. Hairs fall out, and the general thickness and mass of the hair thins dramatically.
A thinning beard is a sign of a badly damaged beard that appears much later. If you’ve seen a substantial thinning of your beard hair, you’ll need to address some basic concerns with your beard, such as making sure you’re getting enough nutrients to promote your development and preserve your beard hair from the inside.
Beard hairs that break easily and do not regrow after falling out suggest a far more serious problem than beard hair. If you’re experiencing a lot of hair loss, it’s time to rethink your daily beard regimen and focus on boosting your general health by exercising and modifying your diet.
7. Skin that is irritated
Irritated and inflamed skin underneath the beard may also cause damaged beard hair.
A bad hygiene practice or an allergic response to one of your beard products might harm the base of your beard hair, depriving it of necessary nutrients for development.
If the irritation excessively inflames the hair follicle and root, it might be a problem for beard development.
The easiest method to address any skin irritation concerns is to use moisturizing skin solutions that are developed for rapid absorption into the deep layers of the skin while avoiding any irritants.
If you feel one of your beard products is creating an allergic response, I suggest discontinuing use and gradually reintroducing it into your regimen.
What might wreak havoc on your beard?
Because your beard is always with you, it is exposed to the same contaminants and environmental circumstances as you. UV radiation, Tools should be heated., and thorough washing with the incorrect materials may quickly destroy the beard on the front of your face.
To safeguard your beard, I suggest staying away from harsh UV light sources and double-checking that your shampoos and Tools should be heated. are acceptable for your development.
The sun is one of the most damaging factors to your beard. UV light may produce free radicals, which can destroy beard cells’ DNA.
Free radicals, which are extremely energetic organisms, may be found in your beard. They are produced naturally as a result of metabolic processes, and their effects are mitigated by antioxidants.
Make sure you eat a balanced diet rich in antioxidants and cover your beard while out in the sun to reduce the effects of the sun and UV radiation on your beard.
Washing your beard too often might hurt it by losing its natural oils. Make certain you’re using a beard wash designed exclusively for beards. You’re eliminating too many natural oils from your beard when you put a head wash on it.
Because your head is oilier than your face, the formulation of a head shampoo will reflect this.
Tools should be heated.
Straightening one’s hair may affect the physical look of one’s beard. It does this by breaking down some of the linkages between the keratin filaments, which disrupts the hair’s structural integrity. Many beard growers depend too much on heat treatment to keep their beards under control, and the practice is repeated often.
I’ve learned through the years of growing my beard that there’s no reason why you shouldn’t straighten it since it’s a really useful tool. For more detail on whether or not you should straighten your beard, see my other post, Should You Straighten Your Beard? The whole instructions may be found by clicking here.
How to mend a beard that has been destroyed
There are several methods for repairing a damaged beard, but in all circumstances, Prevention is preferable than treatment.
Working out a good daily regimen is all it takes to keep your beard from being harmed. Taking care of your beard is a marathon, not a sprint, and sticking to a reasonable (though flawed) daily regimen is preferable than reacting to problems as they develop.
Maintenance on a daily basis
The secret to developing a nice beard is to stick to a consistent schedule. Beards look better when they’re groomed on a daily basis, even if it’s only a little amount. The majority of people like to groom their beards in one huge session once a week or twice a fortnight, but this seldom results in the best-looking beard.
My everyday regimen consists of the following:
- bathing and shampooing my hair – I do this every 2 to 3 days or after doing anything extremely nasty or smelly.
- Trimming the cheek lines and neckline – while I’m in the shower, I’ll cut my beard’s cheek line and neckline using a single blade safety razor. This technique will help me maintain the line crisp, which is one of the finest methods to keep your beard looking stylish and outstanding.
- As soon as I get out of the shower, I gently wipe my beard dry with a towel. It doesn’t completely remove the moisture, and I have to be cautious since damp beard hair is the most vulnerable to harm. However, I use a towel to absorb the majority of the wetness.
- Blow drying my beard – I have a very organized beard hair drying process. To begin, I’ll use medium to high heat and direct it downward to remove the bulk of the moisture. Then I’ll style the beard with a cold setting on my hairdryer and downwards combing or brushing.
- Most days, after washing, I’ll use a beard oil to offer a little more nutrition and gloss to my beard. Please don’t go overboard with the oil since the beard doesn’t absorb much of it — less is more.
- Application of beard balm, butter, or wax – If there is a special event or I need my beard to look really attractive for whatever reason, I will use another product after applying beard oil. To keep the style in place, the other product will most likely include a little bit of beeswax.
This practice may seem to be lengthy, but it only takes me five to ten minutes every morning since I have made it a habit of doing it without thinking about it.
Treatments in an emergency
Treatments in an emergency of your beard should be saved for emergencies.
Deep hydration treatments and keeping something in your beard overnight should be done every couple of months rather than as a last-minute cure for a problem you’ve recently discovered.
Check read my post below for additional information on the best techniques to restore a damaged beard.
The “how to fix bald spots on beard” is a question that has been asked many times. There are 7 symptoms of damaged beard hair that you can see.
Frequently Asked Questions
How do you know if your beard is damaged?
A: If youre going to ask me that, then Im not sure what the answer would be.
Is it normal for beard hair to break?
A: The beard hair is meant to break. It acts as a natural exfoliation for your skin, and it will eventually grow back stronger.
Can you repair a damaged beard?
- beard breakage when combing
- beard hair breaks easily
- beard hair loss fungus
- alopecia areata beard home treatment
- beard hair falling out with white bulb